Winter is over! Now it's time to adjust your peaksaver thermostat from Heat to Cool. Below are instructions to aid you in converting your thermostat to summer settings.
| || |
Utility Pro Model:
Additional troubleshooting tips:
- Press SYSTEM to set the system to COOL
- Make sure the temperature is set lower than the inside temperature
- Check circuit breaker and reset if necessary
- Make sure power switch at heating and cooling system is on
If after these steps the air conditioning does not come on, (could take anywhere from 10 to 15 minutes) please contact peaksaver at 1-866-323-0206.
® Registered trademark of Toronto Hydro Corporation. Used under licence. Funded by the Ontario Power Authority and offered by PowerStream Inc. OMOfficial mark of the Ontario Power Authority.